2014 ford focus rear door panel removal how to#
2014 ford focus rear door panel removal series#

Take your door panel and feed the door handle through the panel. Then take that grommet, slide it back over the cables, and push it back into place.

Take your new mirror, slide the cables back through the door, and then just push the mirror back into place and replace that 10mm bolt.

Then pull your mirror up and through the door. We don't really have to worry about that, but we'll remove this 10mm bolt. Now T20 is actually stripped and not even really doing anything anymore. Then you want to remove this T20 screw and this 10mm bolt. Then remove this grommet, and you just pull it out. Now twist off this ring and slide that cable out. Pull out on this triangular panel, and then take your door panel and just lift it up and out of the window sill and pull it free. Now pry off this bezel and then slide it forward. We'll just fast-forward as Mike removes all of those.

2014 ford focus rear door panel removal series#

Then remove these two 6.5mm bolts, and then this T20 and this series of T20 screws around the outside of the door panel. Pry off this small cover and then pry off this panel on your pull handle. That pulls the clip out and it comes off. Put my little tool in here, rotate it, and pull it up. Now I can take just a regular screwdriver and create that separation I need. I'm going to take a pair of pliers and I'm just going to grab the very end of it and bend it right up into a little hook. You want to bend it like that, bend this all the way straight. Take a paper clip and make a tool out of it.

2014 ford focus rear door panel removal how to#

Thanks! In this video, we are going to show you how to replace a manual mirror on this 2005 Ford Focus with the same parts and similar process on this Focus from 2003 to 2007 and we'll show you on the driver side with the passenger side is the similar procedure and the items you'll need for this is a new side mirror from, a window crank removal tool or a paper clip, a flat blade screwdriver, a 1/4 inch or 6 1/2mm socket and ratchet, a T20 torx bit and a 10mm socket. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of. Brought to you by, your source for quality replacement parts and the best service on the Internet.